DACEN=DISABLE, INV=INPUT_NOT_INVERTED_, OD=DISABLE_, FILTR=FILTER_DISABLED_, ADMODE=ANALOG_INPUT_MODE_, HYS=DISABLE_, MODE=INACTIVE_NO_PULL_DO, FUNC=P0_26
I/O configuration register for pin P0[26]
| FUNC | Selects pin function for pin P0[26] 0 (P0_26): General purpose digital input/output pin. 1 (ADC0_IN_3): A/D converter 0, input 3. When configured as an ADC input, the digital function of the pin must be disabled. 2 (DAC_OUT): D/A converter output. When configured as the DAC output, the digital function of the pin must be disabled. 3 (U3_RXD): Receiver input for UART3. |
| MODE | Selects function mode (on-chip pull-up/pull-down resistor control). 0 (INACTIVE_NO_PULL_DO): Inactive (no pull-down/pull-up resistor enabled). 1 (PULL_DOWN_RESISTOR_E): Pull-down resistor enabled. 2 (PULL_UP_RESISTOR_ENA): Pull-up resistor enabled. 3 (REPEATER_MODE_): Repeater mode. |
| HYS | Hysteresis. 0 (DISABLE_): Disable. 1 (ENABLE_): Enable. |
| INV | Invert input 0 (INPUT_NOT_INVERTED_): Input not inverted (HIGH on pin reads as 1, LOW on pin reads as 0). 1 (INPUT_INVERTED_HIGH): Input inverted (HIGH on pin reads as 0, LOW on pin reads as 1). |
| ADMODE | Selects Analog/Digital mode. 0 (ANALOG_INPUT_MODE_): Analog input mode. 1 (DIGITAL_FUNCTIONAL_M): Digital functional mode. |
| FILTR | Selects 10 ns input glitch filter. 0 (FILTER_DISABLED_): Filter disabled. 1 (FILTER_ENABLED_): Filter enabled. |
| RESERVED | Reserved. |
| OD | Open-drain mode. 0 (DISABLE_): Disable. 1 (OPEN_DRAIN_MODE_ENAB): Open-drain mode enabled. This is not a true open-drain mode. |
| RESERVED | Reserved. |
| DACEN | DAC output enable. 0 (DISABLE): DAC disable. 1 (ENABLE): DAC enable. |
| RESERVED | Reserved. |